Recessed Microwave Occupancy Detector
The ASENS-C6MW-AD is a recess mounted microwave occupancy detector ideally suited to controlling all types of switchable lighting. When movement is detected, the luminaires are switched on. When an area is no longer occupied, the luminaires will switch off after an adjustable period of time. The detector can be changed from presence to absence detection by using the external switch.
The internal light sensor provides additional energy saving potential by integrating photocell holdoff. When an area is occupied, lighting is only switched on when the level of natural light falls below a preset level.
The functionality of the ASENS-C6MW-AD is controlled by a number of parameters which can be accessed using an infrared remote control such as the ASENS-CHSLCD.
- Basic Programming Handset
- Advanced LCD Programming Handset
- Surface Mounting Box for DDC311, DDC313, ASENS-CPIR and ASENS-C6MW
- Site as far away as posible from any lighting or ventilation equipment
- Do not install in or on a vibrating surface
- Do not fix to a suspended luminaire
- Site as far away as possible from the surface of metal objects
|Supply Voltage||230V AC ±10%, 50Hz|
|Load||10A fluorescent, low voltage, LED|
|Power Consumption||On = 1100mW|
Off = 665mW
|Timeout||Adjustable 10 seconds to 99 minutes|
Optional adjustment by remote controls
|Temperature||-10°C to 50°C|
|Humidity||5% to 95% non-condensing|
|Material||Flame retardant ABS and polycarbonate Class 2|
|Compliance and Standards||EMC-2004/108/EC|
The microwave radiation emitted by these units is extremely low power and complies with ANSI standard "IEEEC95.1-1999. Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields 3kHz 300GHz".