ASENS-C3MW-AD

Adjustable Recessed Microwave Occupancy Detector

ASENS-C3MW-AD

The ASENS-C3MW-AD is a recessed microwave occupancy detector. Ideally suited to controlling all types of switchable lighting. The detector has an adjustable sensor head that allows the area of detection to be optimised for each particular purpose. When movement is detected, the luminaires are switched on. When an area is no longer occupied, the luminaires will switch off after an adjustable period of time. The detector can be changed from presence to absence detection by using the optional external switch.

The internal light sensor provides additional energy saving potential by integrating photocell holdoff. When an area is occupied, lighting is only switched on when the level of natural light falls below a preset level.

The functionality of the ASENS-C3MW-AD is controlled by a number of parameters which can be accessed using an infrared remote control such as the ASENS-CHSLCD.

Order Code

  • ASENS-C3MW-AD

Accessories

Detection

H W L

Sensitivity: Max; Angle: 80°

L W H
30m 6m 2.6m

Sensitivity: 80%; Angle: 80°

L W H
25m 6m 2.6m

Sensitivity: Max; Angle: 0°

L W H
22m 6m 2.6m

Dimensions

ASENS-C3MW-AD Dimensions
D H C
85 92 74

Technical

  • Site as far away as possible from any lighting or ventilation equipment
  • Do not install in or on to a vibrating surface
  • Do not fix to a suspended luminaire
  • Site as far away as possible from the surface of metal objects
Supply Voltage220–240V AC ±10%, 50Hz
Channel 1 Load10A fluorescent, low voltage, LED
Channel 2 LoadMaximum number of digital dimming ballasts = 10 (relay enabled)
Maximum number of digital dimming ballasts = 20 (relay disabled)
Light LevelLight to dark
Terminal Capacity2.5mm²
TimeoutAdjustable 10 seconds to 99 minutes
Optional adjustment by remote control
Temperature-10°C to 35°C
MaterialFlame retardant ABS Class 2
Compliance and StandardsEMC-89/336/EEC
LVD-73/23/EEC
CE Marked

Safety

The microwave radiation emitted by these units is extremely low power. At a distance of greater than 50mm, the power density is less than 6% of the ANSI IEEE C95.1-1991 recommended power density. At a distance of 5mm from the unit it is less than 84% of the recommended power density.

Regional Variations

Note. The frequency of the microwave generator in this product is fixed and should only be used in the UK, China, India, Middle East, Malaysia, Hong Kong and Singapore. For other areas, please contact us.

Wiring

ASENS-C3MW-AD Wiring Diagram