Ceiling Mounted Microwave Presence Detector
The ASENS-C1MW is a recessed ceiling mounted microwave presence detector. Ideally suited to controlling all types of switchable lighting. The unit fits in to a standard single gang accessory box. When movement is detected, the luminaires are switched on. When an area is no longer occupied, the luminaires will switch off after an adjustable period of time.
The internal light sensor provides additional energy saving potential by integrating photocell holdoff. When an area is occupied, lighting is only switched on when the level of natural light falls below a preset level.
- Basic Programming Handset
- Advanced LCD Programming Handset
- Do not site within 1m of any lighting or ventilation equipment
- Do not fix to a vibrating surface
- Site as far away as possible from the surface of metal objects
|Supply Voltage||230V AC ±10%, 50Hz|
|Power Consumption||On 1.15W|
|Load||10A fluorescent, low voltage, LED|
|Timeout||Adjustable 15 seconds to 30 minutes|
Optional adjustment by remote control
|Fixing Method||Surface fixing - 35mm deep plastic surface mount moulded box|
Flush fixing - 25mm deep steel backbox or cavity box
|Temperature||-10°C to 35°C|
|Humidity||5% to 95% non-condensing|
|Material||Flame Retardant ABS Type Class 2|
|Compliance and Standards||EMC-2004/108/EC|
The microwave radiation emitted by these units is extremely low power. At a distance of greater than 50mm, the power density is less than 6% of the ANSI IEEE C95.1-1991 recommended power density. At a distance of 5mm from the unit it is less than 84% of the recommended power density.
Note. The frequency of the microwave generator in this product is fixed and should only be used in the UK, China, India, Middle East, Malaysia, Hong Kong and Singapore. For other areas, please contact us.