ASENS-C1MW-IP

IP Rated Ceiling Mounted Microwave Presence Detector

ASENS-C1MW-IP

The ASENS-C1MW-IP is a surface mounted microwave presence detector. Ideally suited to controlling all types of switchable lighting. The unit is complete with its own IP66 rated housing. When movement is detected, the luminaires are switched on. When an area is no longer occupied, the luminaires will switch off after an adjustable period of time.

The internal light sensor provides additional energy saving potential by integrating photocell holdoff. When an area is occupied, lighting is only switched on when the level of natural light falls below a preset level.

The functionality of the ASENS-C1MW-IP is controlled by a number of parameters which can be accessed using infrared remote controls such as the ASENS-CHS5 or ASENS-CHSLCD.

Order Code

  • ASENS-C1MW-IP

Accessories

Detection

H D
D H
10m 2.8m

Dimensions

ASENS-C1MW-IP Dimensions
A B H1 H2
110 110 15 48

Technical

Supply Voltage230V AC ±10%, 50Hz
Power ConsumptionOn 1.15W
Off 790mW
Load10A fluorescent, low voltage, LED
Weight0.25kg
Terminal Capacity2.5mm²
TimeoutAdjustable 15 seconds to 30 minutes
Optional adjustment by remote control
Fixing MethodSurface fixing - 35mm deep plastic surface mount moulded box
Temperature-10°C to 35°C
Humidity5% to 95% non-condensing
MaterialPolystyrene Type Class 2
IP RatingIP66
Compliance and StandardsEMC-2004/108/EC
LVD-2006/95/EC
CE Marked

Safety

The microwave radiation emitted by these units is extremely low power. At a distance of greater than 50mm, the power density is less than 6% of the ANSI IEEE C95.1-1991 recommended power density. At a distance of 5mm from the unit it is less than 84% of the recommended power density.

Regional Variations

Note. The frequency of the microwave generator in this product is fixed and should only be used in the UK, China, India, Middle East, Malaysia, Hong Kong and Singapore. For other areas, please contact us.

Wiring

ASENS-C1MW-IP Wiring Diagram