Flush Mounted Passive Infrared Occupancy Detector
This is a miniature passive infrared occupancy detector which provides automatic control of lighting loads. This detector is for use with switched loads for LED luminaires.
The unit detects movement using a PIR sensor and then switches the load on, when an area is no longer occupied the load will switch off after an adjustable period of time.
This product is designed to be mounted on a flat side of a luminaire. The detector should be sited such that room occupants are covered by the detection pattern at a recommended mounting height of 2.5m. Lowering the mounting height will reduce the detection range. The light level is being measured via a special photo diode with a spectral filter. This allows for precise light level measurement without interference from thermal radiation.
For order codes, please see individual luminaire product pages.
- Programming Handset
- Smart Programming Handset
- Basic Programming Handset
|Supply Voltage||220–240V AC, 50/60Hz|
|Timeout||Adjustable up to 30 minutes, optional manual adjustment|
|Temperature||0°C to 60°C|
|Material||Flame Retardant ABS|
|Compliance and Standards||EN 61347-1|