M018-CFMHSP-PRO

Flush Mounted High Sensitivity Infrared Dimming Detector

M018-CFMHSP-PRO

The M018-CFMHSP-PRO high sensitivity passive infrared presence detector provides automatic control of lighting loads in buildings and interior spaces with high ceilings. The M018-CFMHSP-PRO is typically installed in our sports hall fittings where mounting heights are too high for standard detectors.

The detector use a highly sensitive passive infrared sensor in a precision dome lens, which enables the M018-CFMHSP-PRO to reliably detect movement over large areas. Mounting heights of up to 15m can be accommodated.

The detection area can be customised (in slot shaped or radial patterns) using a highly innovative clip-on masking shield. The two part mask is supplied as standard.

All functionality is fully programmable using the ASENS-CHSLCD infrared remote control.

For order codes, please see individual luminaire product pages.

Accessories

Detection

H D

Walking Across Detector Area

D9m16m26m40m
H3m6m10m15m

Walking Towards Detector Area

D8m12m20m30m
H3m6m10m15m

Luminaires

The following links are to associated products on our main website. You may wish to open them in a new browser tab or window.

Technical

  • Avoid positioning the detector where direct sunlight may enter the sensor element
Supply230V AC ±10% 50Hz
Circuit Protection10A
Max LoadMaximum number of digital dimming ballasts = 10 (relay enabled)
Maximum number of digital dimming ballasts = 20 (relay disabled)
Dimming output is not SELV, Mains rated cabling must be used
Power ConsumptionOn = 844mW
Off = 847mW
Terminal Capacity2.5mm²
Temperature-10°C to 35°C
Humidity5% to 95% non-condensing
Material (casing)Flame Retardant ABS and Polycarbonate Class 2
IP RatingIP40 without gasket
IP44 with gasket
Compliance and StandardsEMC-2004/108/EC
LVD-2006/95/EC
CE Marked