Flush Mounted High Sensitivity Passive Infrared Presence Detector
The M017-CFMHSP high sensitivity passive infrared presence detector provides automatic control of lighting loads in buildings and interior spaces with high ceilings. The M017-CFMHSP is typically installed in our sports hall fittings where mounting heights are too high for standard detectors.
The detector use a highly sensitive passive infrared sensor in a precision dome lens, which enables the M017-CFMHSP to reliably detect movement over large areas. Vertical mounting heights of up to 15m can be accommodated.
The detection area can be customised (in slot shaped or radial patterns) using a highly innovative clip-on masking shield. The two part mask is supplied as standard.
All functionality is fully programmable using the ASENS-CHSLCD infrared remote control.
For order codes, please see individual luminaire product pages.
- Basic Programming Handset
- Advanced LCD Programming Handset
Walking Across Detector Area
Walking Towards Detector Area
- Avoid positioning the detector where direct sunlight may enter the sensor element
|Supply||230V AC 50Hz|
|Maximum Load||8A resistive and incandescent|
3A low energy
3A low voltage
|Power Consumption||On = 822mW|
Off = 847mW
|Temperature||-10°C to 35°C|
|Humidity||5% to 95% non-condensing|
|Material (casing)||Flame retardant ABS and Polycarbonate Type 2|
|IP Rating||IP40 without gasket|
IP44 with gasket
|Compliance and Standards||EMC-2004/108/EC|