Flush Mounted Passive Infrared Presence Detector
This is a miniature passive infrared occupancy detector which provides automatic control of lighting loads. This detector is for switched loads, be they fluorescent or LED luminaires.
The unit detects movement using a PIR sensor and then switches the load on, when an area is no longer occupied the load will switch off after an adjustable period of time. This unit also has the benefit of offering photocell hold off.
This product is designed to be mounted in the front face of a luminaire. The detector should be sited such that room occupants are covered by the detection pattern at a recommended mounting height of 2.8m. Lowering the mounting height will reduce the detection range.
If using absence detection, only one luminaire may be connected to one switch to avoid synchronisation issues. Absence detection should only be used in areas where there is one luminaire.
For order codes, please see individual luminaire product pages.
- Basic Programming Handset
- Advanced LCD Programming Handset
|Supply Voltage||230V AC ±10%, 50Hz|
|Power Consumption||On 811mW|
|Timeout||Adjustable 0 seconds to 99 minutes|
Optional adjustment by remote controls
|Temperature||-10°C to 50°C|
|Humidity||5% to 95% non-condensing|
|Material||Flame Retardant ABS Type Class 2|
|Compliance and Standards||EMC-2004/108/EC|