Batten Mounted Passive Infrared Dimming Detector


This is a miniature passive infrared occupancy detector which provides automatic control of lighting loads. This detector is for switching and dimming loads, be they fluorescent or LED luminaires.

The unit detects movement using a PIR sensor and then switches the load on, when an area is no longer occupied the load will switch off after an adjustable period of time. This unit also has the benefit of offering photocell hold off. When the luminaires are lit and the area is occupied, the lamps will fade to a pre-configured level. This detector can also be programmed for step back illumination to provide continuous low level illumination.

This product is designed to be mounted on a side face of a luminaire with a side mounted housing. The detector should be sited such that room occupants are covered by the detection pattern at a recommended mounting height of 2.8m. Lowering the mounting height will reduce the detection range.

This unit has an added function of a burn in period. By setting the burn in parameter with a remote control, a time period can be set for which the lamps will stay on maximum output. This ensures the lamps are conditioned according to manufacturers' recommendations.

For order codes, please see individual luminaire product pages.



5m 2.8m


M002-CBMP-PRO Dimensions
123 34 28


The following links are to associated products on our main website. You may wish to open them in a new browser tab or window.


Supply Voltage230V AC ±10%, 50Hz
Power ConsumptionOn 511mW
Off 516mW
TimeoutAdjustable 0 seconds to 99 minutes
Optional adjustment by remote controls
Temperature-10°C to 35°C
Humidity5% to 95% non-condensing
MaterialFlame Retardant ABS Type Class 2
IP RatingIP65
Compliance and StandardsEMC-2004/108/EC
CE Marked