Integral Microwave Presence Detector


This small microwave prescence detector provides full automatic control of the lighting load. The detector switches the loads in specific fittings, making the individual luminaires fully automatic.

The detector is equipped with settings for delay time, detection range and 'bright out'. The 'bright out' setting prevents the lights from switching on when there is already sufficient illumination in the space.

The unit is installed within the luminaire and can not be seen from the outside, maintaining the aesthetics of the luminaire. The microwave detection can operate through the front diffuser of the luminaire.

This detector is specifically used with LED technology as the delay time can be reduced since LEDs are not affected by the length and number of switching cycles.

For order codes, please see individual luminaire product pages.


5m 3m


The following links are to associated products on our main website. You may wish to open them in a new browser tab or window.


Mounting5m Maximum
Supply Voltage230–240V AC, 50Hz
Power Consumption< 0.5W
TimeoutAdjustable 30 seconds to 30 minutes
Temperature-20°C to 75°C
Humidity5% to 85% non-condensing at 30°C
MaterialHalogen Free PC
IP RatingIP20
Compliance and StandardsEN 61347-1
EN 61347-2-11
EN 61000-4-4
EN 61000-4-5
EN 60669-2-1
EN 60598-1 - 850°C Passed