DDC910

Twin DALI Network DALI Router

DDC910

The DDC910 router uses an ethernet connection (10/100Mbps) as a network backbone, to seamlessly combine DALI networks. Basic functionality is available 'out of the box' without any programming. System software allows for advanced configuration and function programming of the router.

The system provides energy saving features via presence detection and constant light functionality. Further automation can be achieved through scheduled events. OPC server software or Tridan drivers enable interfacing to Building Management Systems.

A PC can be connected to the system for diagnostics and logging purposes if required, but all data is stored within the system itself so there is no need for PC control in daily operation. The elimination of a central controller ensures no single point of failure can cause a total system shutdown.

Key Features

  • Supports a total of 128 devices (64 on each subnet)
  • 250mA power supply for each DALI subnet
  • Up to 100 routers may be networked together
  • Up to 12,800 DALI devices (16,000 groups) on router system
  • Industry standard protocols (TCP/IP, UDP/IP and DALI)
  • Built in real time clock
  • Universal supply input

Applications

  • From single office rooms, meeting rooms and corridors to a fully networked office building
  • From a school classroom to a networked multi-site university complex
  • In hospitals, from patient rooms and treatment rooms to public areas

Order Code

  • DDC910

Dimensions

DDC910 Dimensions
L W H
158 100 58

Technical

  • For installation in a restricted access location only
  • External mains supply must be protected, external protection must not exceed 6A MCB
  • Install the unit horizontally to allow for heat dissipation
  • Any enclosure must provide adequate cooling and ventilation
Mains ConnectionUp to 4mm² solid core or up to 2.5mm² stranded
DALI Connection0.5mm²–2.5mm², 1.0mm²–1.5mm² recommended
Maximum length: 300m at 1.5mm²
All cables must be mains rated
Ethernet1xRJ45 10/100Mbps, Cat 5E up to 100m (auto MDI/MDI-X crossover)
Mains Supply85–264V AC, 45–65Hz
Power Consumption23VA (DALI subnet fully loaded)
Circuit Protection6A MCB maximum
DALI Supply2x250mA (current limited)
Weight260g
HousingDIN rail, keep mains and DALI wiring separate from ethernet cable
IP RatingIP30 (IP00 at connections)
Ambient Temperature0°C to 40°C
Storage Temperature-10°C to 70°C
Relative Humidity90% max, non-condensing
Isolation4kV
Compliance and Standards
DALIIEC06929
EmissionEN 55 015
ImmunityEN 61 547
SafetyEN 60 950
EnvironmentComplies with WEEE and RoHS directives
CECE Marked

Wiring

DDC910 Wiring Diagram