DDC318

Wall Mounted DALI Passive Infrared Detector

DDC318

The DDC318 is a wall mounted passive infrared presence or absence detector, used in conjunction with our DALI lighting control system and provides automatic control of lighting loads in individual room spaces. Typically used in areas such as cellular offices or small meeting rooms. The DDC318 is also suitable for other applications where a wall mounted detector is preferred or where the use of traditional ceiling mounted sensors is not possible.

A high quality passive infrared sensor enables the DDC318 to reliably detect movement in the space. The detector can switch on lights when a space is occupied and dim (if DALI equipped fittings are installed) and switch off when the space is vacated.

In addition to the passive infrared sensor, the DDC318 has a touch control button which allows manual override of the lighting on and off as well as light level adjustment if dimmable lighting is installed.

The device mounts in a surround capable of taking either a single unit or in a triple surround with one of the DDC318 with space for two other control switch plates. The unit also has an infrared receiver built in to allow remote control via handsets such as the DDC303.

The parameters of the sensors and the buttons are programmable by the system software.

Key Features

  • Controls lighting loads based on presence/absence detection
  • 5m detection range
  • Manual Override/Dimming button built in
  • For wall mounting using DDC23xD or DDC23xS surrounds
  • Available in black or white finish to match the square button panel range
  • Simple connection and integration into a DALI router network
  • Programmable software

Order Codes

  • DDC318W : White Fascia
  • DDC318B : Black Fascia

Accessories

  • Double Mounting Frame for Square Button Switches
  • Single Mounting Frame for Square Button Switches
  • Infrared Remote Control for DALI Networks
  • Single DALI Network Router
  • Twin DALI Network DALI Router
  • Twin DALI Network Router with DMX and S-DIM

Detection

Walking Across Detection Area

D H
H D
95° 5.0m

Walking Towards Detection Area

D V
V D
85° 5.0m

Infrared Reception Range

D H
H D
120° 5.0m

Dimensions

DDC318 Dimensions
H W D
48.5 35.5 32

Technical

DALI Connections2 part connectors with paired terminal for simple link through
Terminal Capacity0.5mm²–2.5mm² stranded or solid
All cabling must be mains rated
DALI Supply Input10mA
IsolationDouble isolation from DALI network
PIR sensorMounted in fascia
IR Receiver36kHz
Status LEDTop left corner of fascia
Weight35g
MaterialCase = Black flame retardant ABS
Fascia = White or Black flame retardant ABS
IP RatingIP30 (IP00 at connectors)
Ambient Temperature0°C to 40°C
Storage Temperature-10°C to 70°C
Relative Humiditymax 90%, non-condensing
Compliance and Standards
DALI StandardIEC60929
EMC EmissionEN 55 015
EMC ImmunityEN 61 547
SafetyEN 60 950
Isolation4kV
EnvironmentalComplies with WEEE and RoHS directives