High Sensitivity Recessed DALI Passive Infrared Detector
The DDC317 high sensitivity presence or absence detector provides automatic control of lighting loads in buildings and interior spaces with high ceilings. The DDC317 is typically installed in warehouses, sports halls and atria and is used in other applications where the required mounting height exceeds that of standard detectors.
The detector uses a highly sensitive passive infrared sensor within a precision dome lens, which enables the DDC317 to reliably detect movement over large areas. Vertical mounting heights of up to 15m can be accommodated.
The detection area can be customised (in slot shaped or radial patterns) using a highly innovative clip-on masking shield. The two part mask is supplied as standard.
The DDC317 can be flush fitted in to ceilings that have sufficient void space or can be mounted directly to a solid ceiling or slab using the ASENS-CPIR-BOX.
As with other system sensors within the range, the DDC317 can be configured using system software and all the functions programmed remotely.
- Controls lighting loads based on presence / absence detection
- For mounting on high ceilings
- Can be fitted into ceiling tiles (or false ceilings), or surface mounted
- Clip-on masks to customise the detection area
- Simple connection and integration into a DALI control network
- Programmable from software
- Surface Mounting Box for DDC311, DDC313, ASENS-CPIR and ASENS-C6MW
- Single DALI Network Router
- Twin DALI Network DALI Router
- Twin DALI Network Router with DMX and S-DIM
Walking Across Detector Area
Walking Towards Detector Area
Two clip on shielding mask area supplied with the DDC317. Each can cover half of the sensor lens. Lateral or radial strips can be cut out of the masks to further customise the detection area.
|Aisle / Corridors (Mask #1 and Mask #2)|
|Slot 1||Shield coverage : 45%|
|Slot 2||Shield coverage : 30%|
|Slot 3||Shield coverage : 20%|
|Slot 4||Shield coverage : 10%|
|Narrow Area (Mask #3 and Mask #4)|
|Diameter 1||Shield coverage : 90%|
|Diameter 2||Shield coverage : 65%|
|Diameter 3||Shield coverage : 45%|
|Diameter 4||Shield coverage : 35%|
|Diameter 5||Shield coverage : 20%|
|DALI Connections||Removeable connector block|
0.5mm²–1.5mm², solid or stranded
All cables must be mains rated
|DALI Supply Input||13–22.5V|
|Material (casing)||Flame retardant ABS and PC/ABS|
|Finish / Colour||Matt / White|
|IP Rating||IP40 without gasket|
IP44 with gasket
|Gasket||Silicone ingress protection gasket (not compatible with surface mount box)|
|Masks||2 adaptable masks included, each covering half of the lens|
|Ambient Temperature||10°C to 35°C|
|Storage Temperature||-10°C to 70°C|
|Relative Humidity||Max 90%, non-condensing|
|Compliance and Standards|
|Environment||Complies with WEEE and RoHS directives|