DDC311

Compact Recessed DALI Passive Infrared Detector

DDC311

The DDC311 ceiling mounted passive infrared detector is a compact, flush mounting unit which provides energy saving functions when used within a DALI system.

The detection sensitivity can be set using software during commissioning to ensure it is configured appropriately for the area in which it is being used.

Key Features

  • The PIR Sensor detects movement within the detection range allowing load control in response to changes in room occupancy

Order Code

  • DDC311

Accessories

  • Surface Mounting Box for DDC311, DDC313, ASENS-CPIR and ASENS-C6MW
  • Single DALI Network Router
  • Twin DALI Network DALI Router
  • Twin DALI Network Router with DMX and S-DIM

Detection

H D
D H
7m 2.8m

Dimensions

DDC311 Dimensions
D H C
76 65 64

Installation Notes

  • Position the sensor so that the occupants of the room are normally inside the detection zone
  • The detection pattern illustrated is based on a mounting height of 2.8m. A lower mounting height will decrease the overall size of the detection zone
  • Do not position the sensor within 1m of any lighting, forced air heating, or ventilation equipment
  • Do not fix the sensor to an unstable or vibrating surface

Technical

Connections
External Power / DALIRemoveable 2-pole connectors
Terminal Capacity0.5mm²–2.5mm² All cables must be mains rated
Power
DALI Supply Input13–22.5V
DALI Consumption15mA
Mechanical Data
Material (casing)Non-flammable ABS
Finish / ColourMatt / White
Weight58g
IP RatingIP30
Operating Conditions
Ambient Temperature0°C to 35°C
Storage Temperature-10°C to +70°C
Relative HumidityMax 95%, non-condensating
Conformity and Standards
EMC ImmunityEN61000-6-1
EMC EmmissionsEN6100-6-3
SafetyEN60730-1
EnvironmentComplies with WEEE and RoHS Directives