ASENS-CHSLCD

Advanced LCD Programming Handset

ASENS-CHSLCD

This remote control is a compact infrared handset used for the operation, configuration and programming of our ASENS detector ranges which have the ability to be programmed via infrared. Programming is achieved by selecting the parameter to be programmed from the appropriate menu and then transmitting the setting to the target device by pressing the send button.

Features

  • USB Port for updating the handset's software
  • Macros for creating and saving settings which can be recalled to program devices
  • Readback to recall settings from a target device

Order Code

  • ASENS-CHSLCD

Care

Battery Replacement

The battery compartment is located at the rear of the handset.

  1. Press and slide the battery compartment door towards the bottom of the remote control
  2. Lift out the batteries from the holders and insert replacements (AAA type) ensuring the correct polarity
  3. Slide the door back in to the handset, ensuring that it clips in to place

Cleaning

The exterior of the handset can be cleaned using a damp cloth. Stubborn marks may be removed by using a mild detergent.

Detectors

  • Ceiling Mounted Microwave Presence Detector
  • IP Rated Ceiling Mounted Microwave Presence Detector
  • Adjustable Recessed Microwave Occupancy Detector
  • Adjustable Recessed Microwave Dimming Occupancy Detector
  • Recessed Microwave Occupancy Detector
  • Recessed Microwave Dimming Occupancy Detector
  • Compact Recessed Passive Infrared Occupancy Detector
  • Compact Recessed Passive Infrared Occupancy Detector
  • Recessed High Sensitivity Passive Infrared Occupancy Detector
  • Recessed High Sensitivity Passive Infrared Dimming Detector
  • Compact Recessed Passive Infrared Dimming Occupancy Detector
  • Batten Mounted Passive Infrared Presence Detector
  • Batten Mounted Passive Infrared Dimming Detector
  • Flush Mounted Passive Infrared Presence Detector
  • Flush Mounted Passive Infrared Dimming Detector
  • Short Arm Mounted Passive Infrared Occupancy Detector
  • Short Arm Mounted Passive Infrared Dimming Detector
  • Flush Mounted Microwave Occupancy detector
  • Flush Mounted Microwave Occupancy detector
  • Flush Mounted High Sensitivity Passive Infrared Presence Detector
  • Flush Mounted High Sensitivity Infrared Dimming Detector

Dimensions

ASENS-CHSLCD Dimensions
L W H
160 94 25

Programming

Programming

  • Firstly turn the remote control on
  • Select a product family
  • Select a product
  • Select the programming subset
  • Scroll up or down to select the parameter to change
  • Change the desired value as required
  • Press Send to transmit the new parameter value to the detector
  • If more than one parameter has been changed, press and hold Send for 2 seconds and all the parameters in the current menu will be uploaded to the device, including ones which have not been modified

Readback

This readback function allows the user to retrieve a parameter value from a particular detector. This can be done on an individual basis or all the settings. The readback range is between 8m and 10m depending on the detector.

  • Highlight the parameter to be read from the detector
  • Direct the handset towards the detector and press the Read button. The handset will click when the parameter has been downloaded, the detector will flash its LED and the value will be shown against the parameter in the menu
  • This can then be edited if necessary. Point the handset at a detector and press the Send button. This will send the setting to that detector
  • To readback all the parameters in a menu, press and hold the Read button for more than 1 second
  • The handset will click each time a parameter is received
  • The device will show multiple flashes of its LED
  • All of the values will be shown against the parameters in the menu
  • The individual parameters may be edited and then saved as a macro
  • If a parameter has not been received correctly because of a communication error, the missing value is replaced by dashes
  • Press Enter to reveal the previous value or hold Enter to reveal all the previous values
  • When reading back, the relay wil temporarily be switched off and will return to its normal state 2 seconds after the read back has been completed

Technical

Weight17g
Battery6V DC
4 x AAA (supplied with the unit)
Infrared RangeLow = 8m
Medium = 15m
High = 25m
Temperature0°C to 35°C
Humidity5% to 95% non-condensing
ConformityEMC-2004/108/EC
CE Marked